東莞市海達儀器有限公司為您介紹辦公桌測試儀器項目!
1.垂直負載下的穩定性試驗:
Stability test of the vertical load
把試件放在試驗基面上。在其zui不穩定桌邊中心離邊沿向內
Place test specimen on the base surface. Impose the force to the table in its center from the edge of the most unstable inward
2.垂直和水平載入穩定性試驗:
Vertical and horizontal load stability test
把試件放在試驗基面上。用擋塊擋住試件zui不穩定邊的桌腳。防止試件在試驗中移動。在該邊中心離邊沿向內
Put the specimen on the test-based surface. With the block blocking the most unstable side of the specimen legs to prevent the test specimen to move. The edge center from the edge inward
3.垂直靜載荷試驗:
Vertical static load test
在桌面易于發生破壞的位置,按規定的力通過載入墊,垂直向下重復施加10次。每次至少應保持10秒。
On the most easy damaged position of the desk surface , to impose the specified force by loading pad, vertical put down repeated 10 times. Keep 10 seconds at least.
Desktop sustained vertical load test
海達儀器所生產的辦公桌測試儀器項目眾多,受保護,在此不一一介紹,咨詢:!